Enough Flippancy: A Jadah Post-retrospective

JoeActor · 03-06-2008, 09:18 AM

Hey all,
Here's a wonderful post from Diane Havens for Robert Jadah's Birthday!
Great stuff - well worth a listen ;-)
-- Joe

----- Diane's Post -----

For those of you who know Robert Jadah from that other forum -- you may enjoy hearing this tribute, featuring only a fraction of the many cyber friends he's made over the years.

And there is no better way to surprise someone for a birthday than to have the party a bit before the birthday -- plus it extends the festive birthday season! And since the call of the wild maples may take Mr. Jadah from the board for a while soon, I wanted to post this modest tribute before he leaves.

And so, the early release of ENOUGH FLIPPANCY: A JADAH POST-RETROSPECTIVE. (run time 6:16, so sit back and relax.)

Robert Jadah Enough Flippancy.mp3
(cross posted from vos)

Many thanks to all who made it possible -- you know who you are.

Happy (early) birthday, Robert!

bigbry · 03-06-2008, 10:08 AM

Mine just flew by ... Happy Birthday Robert... now get out there and learn French!! Cheers buddy!!

By the way that was a great TRIBUTE!!
Bry

Diane Havens · 03-06-2008, 01:18 PM

Naturellement Robert parle français -- le plus excellemment ! Quant à moi, pas tellement.

It was great fun compiling and producing the tribute. I had LOADS of material to work with. Whew!!

Happy BD to all March babies!

bigbry · 03-06-2008, 03:37 PM

GREAT Work DB...loved it
Bry

Lizden · 03-06-2008, 05:09 PM

Very Nicely done!

Liz

Robert Jadah · 03-08-2008, 12:55 PM

Good old young Diane.
I hoist tankards of ale to her production and initiative, and am humbled and warmed by all the cyber-friends who contributed their talents and time.

I shall now carefully listen and identify each and every one, but picked out Joe J pretty clearly right away.
THANKS ALL. Even if my birthday is still some time away (the 20th), I love getting an early start on any celebration.

Voices On!

connieterwilliger · 03-08-2008, 04:11 PM

That was lots of fun. Thanks Diane!

Regards, from another March baby - St. Patty's Day (there's always a party on my birthday!)

Diane Havens · 03-08-2008, 05:07 PM

Thanks, Bry, Liz and Connie. Happy birthday to you as well. I'm also a March baby (31st), so glad to be in good company. St. Patrick's day -- a nice one! I'll remember you at my annual stew and brew gathering.

And nice to throw the paradoxical old-young into your description of me, Robert. (I think that's the right order...hmmm?)

03-06-2008, 09:18 AM	#1 (permalink)
JoeActor Administrator Join Date: Aug 2007 Location: Los Angeles, CA Posts: 1,352	Enough Flippancy: A Jadah Post-retrospective Hey all, Here's a wonderful post from Diane Havens for Robert Jadah's Birthday! Great stuff - well worth a listen ;-) -- Joe ----- Diane's Post ----- For those of you who know Robert Jadah from that other forum -- you may enjoy hearing this tribute, featuring only a fraction of the many cyber friends he's made over the years. And there is no better way to surprise someone for a birthday than to have the party a bit before the birthday -- plus it extends the festive birthday season! And since the call of the wild maples may take Mr. Jadah from the board for a while soon, I wanted to post this modest tribute before he leaves. And so, the early release of ENOUGH FLIPPANCY: A JADAH POST-RETROSPECTIVE. (run time 6:16, so sit back and relax.) Robert Jadah Enough Flippancy.mp3 (cross posted from vos) Many thanks to all who made it possible -- you know who you are. Happy (early) birthday, Robert!

03-06-2008, 10:08 AM	#2 (permalink)
bigbry User Join Date: Aug 2007 Location: Saskatoon SK Canada Posts: 245	Ha Mine just flew by ... Happy Birthday Robert... now get out there and learn French!! Cheers buddy!! By the way that was a great TRIBUTE!! Bry

03-06-2008, 01:18 PM	#3 (permalink)
Diane Havens Pacific East Coast Voicer Join Date: Sep 2007 Location: New Jersey Posts: 629	Naturellement Robert parle français -- le plus excellemment ! Quant à moi, pas tellement. It was great fun compiling and producing the tribute. I had LOADS of material to work with. Whew!! Happy BD to all March babies! __________________ Diane http://web.mac.com/dbhavens Last edited by Diane Havens; 03-06-2008 at 02:14 PM.

03-06-2008, 03:37 PM	#4 (permalink)
bigbry User Join Date: Aug 2007 Location: Saskatoon SK Canada Posts: 245	Hey GREAT Work DB...loved it Bry

03-06-2008, 05:09 PM	#5 (permalink)
Lizden Bi-lingualVO Talent Join Date: Dec 2007 Posts: 53	Very Nicely done! Liz __________________ Liz de Nesnera Bilingual English/French Voice Talent www.hireliz.com SaVoa #07037 2008 Voicey Awards Finalist!

03-08-2008, 12:55 PM	#6 (permalink)
Robert Jadah of the Frozen Tundra Join Date: Aug 2007 Location: South of Montreal Posts: 165	Good old young Diane. I hoist tankards of ale to her production and initiative, and am humbled and warmed by all the cyber-friends who contributed their talents and time. I shall now carefully listen and identify each and every one, but picked out Joe J pretty clearly right away. THANKS ALL. Even if my birthday is still some time away (the 20th), I love getting an early start on any celebration. Voices On! __________________ TUNDRA TONES (the voice from the wilderness)

03-08-2008, 04:11 PM	#7 (permalink)
connieterwilliger User Join Date: Aug 2007 Location: San Diego - serving the world Posts: 61	That was lots of fun. Thanks Diane! Regards, from another March baby - St. Patty's Day (there's always a party on my birthday!) __________________ Connie Terwilliger SaVoa #07013 www.voiceover-talent.com

03-08-2008, 05:07 PM	#8 (permalink)
Diane Havens Pacific East Coast Voicer Join Date: Sep 2007 Location: New Jersey Posts: 629	Thanks, Bry, Liz and Connie. Happy birthday to you as well. I'm also a March baby (31st), so glad to be in good company. St. Patrick's day -- a nice one! I'll remember you at my annual stew and brew gathering. And nice to throw the paradoxical old-young into your description of me, Robert. (I think that's the right order...hmmm?) __________________ Diane http://web.mac.com/dbhavens

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode